Go
High temperature furnace

High temperature industry is the earliest and most widely used field of tungsten and molybdenum metals. Tungsten and molybdenum metal materials have high melting point, low vapor pressure, low coefficient of thermal expansion, excellent high-temperature strength and creep resistance, and can meet the stringent requirements of high-temperature furnaces, heating elements and heat treatment dishes for materials. Gemei metal gives full play to the high temperature performance of tungsten and molybdenum materials, so that it has better quality, higher service life and lower production cost.


The technical team of gemei can provide the furnace body design scheme and issue a full set of drawings according to the space, current, power and other factors in the hot zone, and customize it for you to meet your requirements for the use of various factors in the hot zone. Of course, we will start with powder and go through perfect process flow and mature technical process to ensure the quality of materials and fast delivery cycle.


Our advantages




微信图片_2020010813373115.jpg


For different operating environments and temperatures of high-temperature furnaces, gemei can provide you with more molybdenum materials and alloys, and select the most appropriate materials to improve production efficiency


Material ScienceApplicationService temperature
Pure molybdenumHeater, heat shield<1200℃
Molybdenum lanthanum-C1Heater, heat shield<1400℃
Molybdenum lanthanum-C2Heater, heat shield<1600℃
AKS-molybdenumHeater, heat shield<1800℃
TZM alloyVacuum furnace parts<1600℃
MHC alloyVacuum furnace parts<1400℃
Lanthanum tungstenHeating element, heat shield, vacuum furnace parts1800-2000℃
AKS-tungstenHeating element, heat shield, vacuum furnace parts2000-2500℃


Gemei can provide you with tungsten molybdenum and its alloy materials for high temperature furnaces


                                               



                                               
Raw material
Blend
Extrusion
Sinter
Forging
Rolling
Heat treatment
Machining
Quality testing
Recycling
Raw material
Starting from raw materials, it is very prominent in the stability and consistency of products. Identify different brands of raw materials and mark the batch number. And each batch of raw materials shall be sampled, inspected and archived. Ensure the traceability of each finished product.
From powder to finished products, GeMei strictly controls every process in the production process
Blend
Ensure that the materials in the milling and mixing process can be fully stirred and evenly distributed to ensure the consistency of the internal organization of the product.

From powder to finished products, GeMei strictly controls every process in the production process
Extrusion
The pressing process is the process of powder blank forming. The pressing of powder is completed by isostatic pressing equipment to make its internal structure uniform and dense.

From powder to finished products, GeMei strictly controls every process in the production process
After the metal powder is pressed by isostatic pressing, it is heated at a temperature lower than the melting point of the main components to make the particles connect, so as to improve the performance of the product, which is called sintering.

Sinter
From powder to finished products, GeMei strictly controls every process in the production process
Forging
Forging technology can make materials obtain higher density, better mechanical properties, and play a role in strengthening the surface.
From powder to finished products, GeMei strictly controls every process in the production process
Rolling
The rolling process makes the metal material produce continuous plastic deformation under the pressure of the rotating roll, and obtain the required section shape and properties.

From powder to finished products, GeMei strictly controls every process in the production process
Heat treatment

It can completely eliminate the internal structural stress of the material, give full play to the best performance of the material, and make the material easier for subsequent machining.

From powder to finished products, GeMei strictly controls every process in the production process
Machining
Through turning, milling, cutting, grinding and other mechanical processing procedures, it can be processed into various customized sizes of customers, and ensure that the internal organization of tungsten and molybdenum materials is tight, stress free and free of holes

From powder to finished products, GeMei strictly controls every process in the production process
Quality testing
Starting from raw materials, quality inspection and control, as well as quality inspection and sampling inspection of each process, continue to ensure the process quality control of each process of the product.
From powder to finished products, GeMei strictly controls every process in the production process
Recycling
or the materials purchased by customers from gemei, the obsolete materials that reach the service life or update the equipment, gemei can help customers recycle and reuse, reducing the use cost of customers.

From powder to finished products, GeMei strictly controls every process in the production process
Contacts

Jack.Wang
+86 15829392527
sales@xagm.cn

We are happy to provide you with solutions. Please tell us your needs. It has always been our pleasure to solve practical problems and material problems for you.